MB551F-45⁰ Three Expansion Inspection and rolling machine

Inspection & Rolling Machine

This machine mainly applied in the finishing workshops of the non-woven fabric and coated fabric mills for edge-cutting, inspecting and rolling. furthermore, it can also be multi-strip-cutting and rolling

  • Frequency variation, stepless speed adjustment for controlling the inspection&rolling speed;

  • Photoelectric device for automatic edge-alignment;

  • The advanced electronic counter mater in china for the counting of the fabric length(amends, determines and totalizes the fabric length in metre, yard as well as displays the rolling speed )

  • Using roller differential regulation of the volume of fabric tightness inspections;

  • At the fabric spreading feed roller, makes it easier for grabbing the fabric inspection;

  • Under the table and before the winding roll of the equipped with a spreading roller, causes when the fabric winding formation are not involved;

Optional fault stop photoelectric;
Optional automatic or manual cutter;
Optional test data acquisition and processing system, printing device, computer control systems;
Optional electronic weighing and automatic cutting device.

Speed of rolling0-90m/min
Max Diameter of winding rollerφ154 mm
Max diameter of fabric rolls:φ500mm
Edge-aligning error for rolling≤6mm
Max error for fabric length-counting±0.5%
Test plane45°Examining table
Working width1800-2400mm(According to design)

Note:worlding width can be up to 4,000mm